16
Jul
Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Avalon. Turn The Ignition ON.
Press and hold the odometer reset knob.
Reset maintenance required light. Resetting changes the percentage to 100. Let go of the button and press it again holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks.
Let go of the button one more time and hold for five seconds. Turn the ignition to the ON position and confirm that the Service Maintenance Reminder Light goes out. If the light continues blinking in step 5a turn the ignition off and repeat the procedure from step 1.
Of course our service team will automatically reset this light every time you are in for maintenance. 2016-2020 Toyota Tacoma Maintenance Required Warning Light Reset STEP 3 Press And Hold ODOTRIP BUTTON And Turn Ignition To The RUN Position. Hold Knob For At Least 5 Seconds Until MAINT REQD flashes multiple times and the light goes off.
Do you have a 2004-2006 Lexus RX-330 with a Maintenance required light illuminated on the dash. Watch this short video for more information. Quick and simple tutorial on how to reset the maintenance required light on TOYOTA SIENNA XL20 XL30 L LE Limited SE SE Premium XLE from year 2004-2005-2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020.
2004-2010 Sienna Maintenance Required Light Reset STEP 1. Turn The Ignition ON. If your Civic is equipped with daytime running lights DRL the DRL must be disabled so the MAINT REQD light can be reset.
These are the steps. Turn the ignition switch to the OFF position. Press and hold the SELECTRESET button.
Press and hold the ODOMETERTRIP button and turn the ignition key to the ON position If your vehicle has an ignition button press the ENGINE STARTSTOP button twice without touching the brake pedal Continue to hold down the ODOMETERTRIP button until 000000 MILES appears on the display and the maintenance light turns off. When engine oil needs to replace the MAINT REQD message will appear on the display. The engine oil maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle.
Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Avalon. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster.
While holding this button turn the key to the On position but do not start the engine. Continue to hold the odometer reset knob until the Maintenance Required light disappears – about 10 seconds. Maintenance Light Reset You will be required to reset this indicator light once the oil has been changed regardless of whether you service your Tundra at your local dealership or change the oil yourself.
The dealership will know how to do the maintenance required light reset for you and they typically do so without being asked. How to reset maintenance required light on 2004-2015 Toyota Camry. 2007-2015 With vehicle ignition switched to ON position make sure odometer is showing Tripmeter A then turn the ignition switch to OFF position Push and hold the TRIP reset or MODE button.
Resetting the Maintenance Required indicator isnt exactly intuitive but is quite easy to do when taken step by step. Along with the following steps Ive included some helpful pictures of me doing the reset process on my own Prius. Press the Power button twice 2X with your foot off of the brake.
A flashing maintenance required light comes on after 4500 miles. This is an alert for you to make an appointment for car service because you are getting close to the 5000-mile service interval. The maintenance required light will remain on and be solid after the mileage interval reaches 5000 miles since the light was reset.
Unlike the check engine light the maintenance required light in the gauge clusterwhich reads MAINT REQDmeans that it has been 5000 miles since it was last reset. Your Toyota probably needs its scheduled maintenance thenprobably an oil change. Rely on Mossy Toyota for Toyota Corolla Maintenance and Service.
While holding down the trip meter reset knob turn the ignition to run one position before starting engine. Hold down knob for at least 5 seconds. The odometer indicates 000000 and the light goes off.
Below are the steps you should follow to reset the maintenance required light in your 2007 2011 Toyota Camry. Start the engine and press the odometer button to bring up the trip meter A reading. Make sure odometer ODO is displaying total mileage usually the A display.
Turn off vehicle if on.