Penny test on tires

There are several popular ways to check your tire tread depth. They suggest using a quarter instead.

If you see that the depth is 432 inches it may be a good idea to start tire shopping and not wait until it worsens.

Penny test on tires. How to Tell if You Need New Tires. With this easy test a penny can buy you peace of mind when it comes to your tires and safety. Place a penny head first into several tread grooves across the tire.

If you always see the top of Lincolns head your treads are shallow and worn. If this is the case your tires need to be replaced. The penny test is an easy and accurate way to measure tire tread depth.

Take a penny and place it between the tire tread blocks with Lincolns head upside down and facing you. If Lincolns head is buried your tires still have more than 232 of tread. Your tires need to be replaced if the head is visible.

After taking the penny test a tires tread can be visually inspected to spot other issues. The penny test is a simple exercise that you can perform on your own tires. It will tell you if the tread is too low and needs to be replaced.

Keep reading to find out what we mean by the penny test and how simple it is for you to measure your own existing tire tread levels. When to Replace Your Tires. Heres how it works.

Place a penny between the tread ribs on your tire. A rib refers to the raised portion of tread that spans the. Turn the penny so that Lincolns head points down into the tread.

See if the top of his head disappears between the ribs. If it does your tread is still above. Performing the Test 1.

Do the penny test every month to make sure your tires are safe. Your tread wears down as you drive so checking it. Grab a clean penny to perform the test on your tires.

Dig around in your wallet purse or coin jar for a clean. Rotate the penny so Abes head is. You should replace your tire once its tread is worn down to around 232 of an inch.

Oddly enough pennies make the perfect measuring tool. Simply hold a penny upside down making sure Abraham Lincolns head is facing the ground. Place the penny into your tires tread depth with ol Honest Abe facing toward you.

The penny test is a little outdated and to be safe you really should replace your tires when your tread depth gets below 216s of an inch. Fortunately 216s of an inch is the exact distance on a quarter from the top of Washingtons head to the edge of the quarter. So your best bet is to use a quarter to measure tread depth.

The Penny Test Place your penny into a tread groove upside down. In other words your penny should be going into the tread headfirst. Examine the part of the penny thats showing.

If you can see the top of Abes head your tread is shallow. Repeat the penny test in several grooves of your tires. There are several popular ways to check your tire tread depth.

One easy way is the penny test. Simply insert a penny into your tires tread groove with Lincolns head upside down and facing you. If you can see all of Lincolns head your tread depth is less than 232 inch and its time to replace your tires.

Okay thats not entirely truebut for ages the penny test has been a go-to measurement for determining if rubber tires have worn down too far. Except the penny test isnt as accurate as it once. Use the penny test to see if your tires are worn down and need to be replaced.

Take a penny and place it upside down into several tread grooves on a tire. The penny test tread depth check doesnt hold water. Coins can be substituted as a tire tread depth gauge to measure the critical final few 32nds of an inch of remaining tread depth.

Place a penny into several tread grooves across the tire. If part of Lincolns head is always. The penny test for tires and the quarter test for tires both work the same way.

You take the coin stick it into your tires tread head-first and if you can see the top of the presidents head then you need new tires. A penny is obviously smaller than a quarter though and so is the distance from the edge of the coin to the top of the head. Penny Test for Tire Tread Wear Measurement Insert a penny into your tires tread groove with Lincolns head upside down and facing you.

If you can see all of the head your tire tread depth is less than 232 inch and its time to replace your tires. Quarter Test for Tire Tread Wear Measurement. Some sources state that the penny test may not be an accurate method of testing out the depth of a tire tread.

They suggest using a quarter instead. If you see that the depth is 432 inches it may be a good idea to start tire shopping and not wait until it worsens. The Penny Test Checking tire tread with a penny is one of the oldest and most reliable techniques for measuring tread depth.

Insert a penny between your tires tread blocks with Lincolns head upside down towards the tire. If Lincolns head is completely visible the tread is worn out and your tires should be replaced. Barring any irregular or unsafe wear patterns the usual life of a tire is most often determined by the amount of tread left on it.

Tires become unsafe and n.